Air Top 2000 ST heater kit

£1,941.62
£1,524.99 (including 20 % tax)
You Save: £416.63

Webasto Air Top 2000 ST

This kit is a 2kw diesel fired hot air heater suitable for running a dry heating system (ducting and vents). This marine kit is supplied with copper fuel piping and appropriate connections and fittings that should satisfy the BSS regulations for fitment onto an inland boat (if fitted correctly), however it is ofcourse still perfectly suitable for fitment into an offshore boat aswell.

Please look at the information below to find out more, if you would like any help or further information then please feel free to give us a call on 01353 663095

Webasto Air Top 2000 ST kit contents

Kit contents

Air Top 2000S heater 12v
Wiring harness
Dip pipe for main fuel tank
Fuel pump
Exhaust silencer, skin fitting, hoses and clips
Mounting bracket
Combi Rheostat timer 12v
60mm Air ducting (please see note below)
60mm air inlet grill
60mm 90 degree bend for air outlet

2000st Single outlet kit comes with a total of 5m of air ducting, the Twin outlet kit comes with an additional 60mm dia T-piece and a total of 6m of air ducting.

Specifications and dimensions

Dimensions of heater

311mm Long x 120mm Wide x 121mm H

2000st Specifications

Heat output = 0.9 - 2.0kw (3,000 - 7,000 BTU)
Diesel Fuel consumption = 0.12 - 0.24 litres/hr (0.03 - 0.06 gal/hr)
Rated voltage = 12v
Rated current for 12v = 1.2 - 2.4A
Airflow = 78 m³ per hour
Air ducting diameter = 60mm (2.63")
Exhaust diameter = 22mm (0.87")

Inland Waterways considerations

Inland waterways considerations

The most popular boats for these units to be installed in are river Cruisers, this leads to a number of things needing to be considered:

Webasto heaters (including Webasto Air top 2000st, Evo and Thermo Top) use a top mounted dip pipe fuel take off. Therefore access to the top of the tank is neccessary (side access is possible, please ask for details),
All fuel pipe to pass BSS regulations will need to be copper or ISO7840 rated rubber,
Exhaust positioning, fuel supply and 12v supply will all be subject to BSS regulations,
One of our (Ely Boat Chandlers) members of staff is an independant Boat Safety Scheme examiner and would be happy advise a customer regarding BSS regulations relating to fitment of a Webasto Air Top 2000 ST (or alternative model). Fitment of a marine diesel heater sounds problematic, but if you follow the installation manual provided and take account of BSS regulations it is pretty simplistic compared to many other DIY installations carried out by boatowners

How to order

How to order

Give us a call on 01353 663095, our opening times are shown on the website. If we aren't open then leave us a message or email us and we would be more than happy to call you back as soon as possible.
We will talk you through any questions you may have or any further information you require.
We can take safe and secure payment over the phone using a debit or credit card.
We take down your details and organise a courier to deliver to the address you specify*.

Or you can order through the website, leave your full details and we will contact you back to confirm your order, answer any questions, take payment and arrange delivery.

*We reserve the right to refuse free delivery in exceptional circumstances (At the proprietors discretion).

Choosing the right heating system

Choosing the right Heating System

As you will be able to see from other pages on our website we offer a number of heating solutions to suit your needs both inland and offshore, therefore we are in a great position to help advise you which product might best suit you. We believe one of the most important things is to think how you want to use the boat and then work backwards to identifty a product that will suit you. We have listed below what we consider to be the main advantages of installing a Webasto diesel heating system:

The Airtop unit itself is small and unobtrusive allowing you to mount it out of the way (for example in the engine bay)
Heating a boat by hot air is an effective way of heating the cabin quickly without having to wait for a system to warm up. Essentially it gives you near instant control over the temperature.
Be aware that when installing a Webasto Air Top you will need to run ducting around the boat / cabin to position outlets and hence distribute the heat.
The control allows you to turn the heater ON / OFF simply and quickly, and the desired temperature can be set in a stepless manner (so you can change the output to suit your preference)

At Ely Boat Chandlers we will spend time helping you to choose the right heating product to suit your needs. We can help you regarding installation questions, boat safety questions and performance questions. Please note that we are not Webasto main dealers and as such cannot carry out installation, warranty or repair work on Webasto products.

Availability

Usually ships in: