Why choose a Wallas diesel hob and blower lid?

• Wallas diesel ovens and hobs are the leading manufacturers of diesel cooking appliances
• Wallas diesel hobs and ovens are VERY easy to use. Simply press the button to turn them on, set the temperature and you're away!
• You can't smell diesel (in fact you wouldn't even know what they run on),
  They warm up very quickly (comparable to a modern domestic electric oven)
• Cooking with diesel gives you the opportunity to have a GAS FREE BOAT and all the safety advantages that go with it
• Wallas diesel cookers and Wallas diesel hobs are very tolerant of red diesel quality, so you needn't be worried about performance and long term regular use
• Cooking on Diesel is very cost effective. For example the 87D combined diesel oven and hob only uses 0.44 litres of diesel an hour when on full!.
• The Blower lid acts as a 1.8kw blown air heater, so its a great space saving for smaller boats, or a very cost effective and convenient instant source of heat for any boat.

Wallas 85 DP diesel hob with blower lid pics & dims

Wallas 85 DU diesel hob with blower lid pics & dims

Wallas 85DU & 85 DP blower lid fitment considerations

Wallas diesel powered cookers and hobs arent sold in a "fitment kit" like a number of other diesel products, this is because we can offer a kit tailored to your individual needs therefore you dont end up paying for parts you dont use or need.

The main considerations we need to take into account when specifying fitment parts for you are:

1. Is it for coastal or inland use? (inland craft are subject to BSS regulations)
2. What sort of boat are you looking to fit the Wallas oven or hob into?
3. Is your fuel tank higher than the oven or hob?, can you fit a dip pipe into your diesel tank? (these answers dictate whether you will need additional parts)

Example inland parts

Standard parts

• 2m of 28mm dia stainless steel exhaust, exhaust insulation, skin fitting for the hob
• 4m Wallas copper fuel line & Wallas in-line fuel filter  (only one fuel supply is needed if you are fitting a separate oven and hob
• Dip pipe for your main fuel tank
• Fixing plate for blower lid is needed if fitting to a Wallas 85DP (surface mount)

.

Fuel Accessories (may be needed)

If the level of the fuel tank is higher than the oven then we need to protect it from "syphoning", this is done by fitting a fuel solenoid in the line which acts as an isolation valve when the Wallas 85DU is turned off.

• Fuel solenoid
• Relay kit if the 85DU or 85DP is fitted with an 86D oven (this allows either the hob or the oven to control the fuel solenoid. Only one relay kit is needed).

Example offshore parts

Standard parts

• 2m of 28mm dia stainless steel exhaust, exhaust insulation, skin fitting for the hob
• Dip pipe for your main fuel tank
• Fixing plate for blower lid is needed if fitting to a Wallas 85DP (surface mount)

.

Fuel Accessories (may be needed)

If the level of the fuel tank is higher than the oven then we need to protect it from "syphoning", this is done by fitting a fuel solenoid in the line which acts as an isolation valve when the Wallas 85DU or 85DP is turned off.