Morco F11-E

Morco F11-E room sealed LPG Water Heater

Boat safety scheme regulations on inland waterways dictate that any new LPG water heater fitted must be "balanced flue". The term balanced flue means that the unit draws its combustion air from outside the cabin (down the twin wall flue in most cases) burns it and then exhausts it outside the cabin (up the flue). The Morco F11-E is a balanced flue product.

Quality features

• On/off switch
• Variable water temperature
• Variable power
• Room sealed
• Upto 11 litres per minute of hot water
• Supplied with horizontal flue as standard. Please see the vertical flue detailed on this site if your installation needs a vertical outlet.

Main body dimensions

• 330mm wide
• 230mm deep (excluding knobs)
• 595mm high

Services needed

• 230v electricity  (35watts)
• 3/4" gas fitting
• Water inlet 3/4"
• Water outlet 3/4"

Technical and performance details

• Nominal outpur power 19kw
• Minimum output power 6.7kw
• Min operating water pressure 0.12 bar
• Max operating water pressure 13 bar
• Butane consumption 1.74kg/hr (running) - no pilot light is needed
• Propane consumption 1.72 kg/hr (running) - no pilot light is needed
• Electrical consumption 35 watts (at 230v)