2kw diesel stove

The natural draight principle works on diesel being dripped onto the bottom of the stove burner pot, it evaporates and mixes with the air, the hot mixture of vapour is ignited in a flame, the flame generates heat, the hot air rises up out of the flue, as the air leaves it pulls more fresh air into the burner (hence a natural draught). The whole cycle then continues.

• The heat output is controlable with the regulator on the back of the stove (its easy)
• The natural draught process needs to be started. It is done with a small capful of meths and a match (give us a ring and we will happily talk you through it - 01353 663095)
• The natural draught process relies on the flue being specified and installed correctly,  We are very happy to talk this through with you to ensure you get the right system to suit your boat.

• Overall height =450mm
• Overall diameter = 245mm
• Height to centre of flue outlet = 355mm
• Flue outlet diameter = 70mm
• Minimum output = 0.5kw (0.1L per hour fuel consumption)
• Maximum output = 2kw (0.3L per hour fuel consumption)
• Construction = Stainless steel 

 Glembring stove brochure.pdf (82.95 KB)

The Glembring range come in the following options:

1. Standard (S/S cylindrical without viewing window)
2. Standard with Backboiler
3. Viewing window (S/S cylindrical with viewing window)
4. Viewing window with Backboiler

(All options are priced at the bottom of the page)

.

For use on the Inland waterways you will need the Drip tray (detailed on this website) to pass the BSS scheme. If you are not sure about this please feel free to give us a call on 01353 663095.

.